G.657B3 Bending Insensitive Single mode Fiber 2mm g657 optical fiber
Model：G.657B3
Description：
Bending insensitive single-mode fiber encompasses all the features of low water peak dispersion unshifted single-mode fiber and provides good resistance to macro-bending. It has low macro-bending sensitivity and low water-peak level. It is comprehensively optimized for use in O-E-S-L band(1260-1625nm). It offers good resistance to additional losses due to low macro-bending in the 1600nm wavelength region. This not only supports L-band applications but also allows for easy installation without excessive care when storing the fiber, for example, in splicing cassettes. For cable use inside buildings, the fiber supports installation with small cable bending radii and compact organizers. The bending induced loss at 1625nm no more than 0.5 dB for one wind with 10nm radius.
Key features:
1.Low attenuation satisfying the operation demand in O-E-S-C-L band.
2.Good bending loss resistance at short radius bends.
3.Low micro-bending loss for highly demanding cable designs including ribbons.
4.Low PMD satisfying high bit-rate and long-distance transmission requirements.
5.Accurate geometrical parameters that insure low slicing loss and high splicing efficiency.
Advantages of Optical Fiber:
1. The data transmission speed using optical fiber cable is very very high because of the speed of thelight is very high.
2. Any electrical and magnetic interference cannot affect the light, so there is no interference and distortion problem in data transmission through fiber optic cable.
3. The equal quantity of optical fiber is cheaper than copper or aluminum wires.
4. The fiber optics are very thin in size and very light in weight.
5. The fiber optic cable has a very high bandwidth so huge amount of data or information can be transmitted through the optical fiber cable.
6. There is very low loss occurs in optical fiber than copper or aluminum wire during data transmission.
Application：
1.Short pitch cables for special application.
2.High performance optical network operating in O-E-S-C-L band.
3.High speed optical routes in buildings (FTTx).
4.Cables with low bending requirements.
Reviews
There are no reviews yet.